The AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback. ATProducts The turntable includes a straight aluminium tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. The AT-LPW30TK is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input. Features: Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM Fully manual operation Adjustable dynamic anti-skate control Professional anti-resonance, die-cast aluminium platter with rubber mat AT-HS4 universal ½"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application Straight tonearm with hydraulically damped lift control and lockable rest Anti-resonance MDF (medium density fiberboard) plinth with teak simulated wood veneer Built-in switchable phono pre-amplifier for phono or line-level output AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover Specifications: Type: Belt-drive manual turntable Motor: DC servo Drive Method: Belt drive Speeds: 33-1/3 RPM, 45 RPM Turntable Platter: Die-cast aluminum Wow and Flutter: < 0.15% WRMS (33 RPM) at 3 kHz Signal-to-Noise Ratio: >60dB Output Level: Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized Power Supply Requirements: 100-240V AC, 50/60 Hz, 0.5 A Max. Power Consumption: 110 V 60 Hz Working: 1.1 W Motor off: 1.0 W Power off: 0.1 W Dimensions: 420.0 mm (16.53") W x 340.0 mm (13.38") D x 116.9 mm (4.6") H Weight: 3.90 kg (8.60 lbs.) without dust cover Tonearm type: Static balanced straight aluminum pipe tonearm Effective arm length: 223.6 mm Overhang: 18.6 mm Tracking error angle: <2 degrees Applicable cartridge weight: 12-17 g Stylus pressure adjustment range: 0-3 g AC adapter: 12 V, 0.5 A Replacement Stylus: AT-VMN95C Accessories Included: Dust cover, Platter Turntable Mat Drive belt Counterweight AT-HS4 headshell AT-VM95C stereo cartridge 45-RPM adapter RCA audio cable (approx.. 1.0 m (3.3’)) AC adapter (approx. 1.5 m (4.9’)) (AD-SA1205WE) Dust cover hinges Product Code: AT-LPW30TK